A Triple Play From MITEQ

MITEQ has three new products to chat about. The company has a new, 2-Way Power Divider Model PD2-1030-250N that operates in the frequency range of 1,020 to 1,040 MHz. This unit handles up to 250 watts average power and is available with N-Type connectors with an isolation of 25 dB, insertion loss of 0.5 dB, amplitude balance of ±0.1 dB and phase balance of ±1 degree.This model is also available as RoHS compliant, MITEQ Model PD2-1030-250N-R.

MITEQ has also debuted their absorptive Single Pole Ten Throw Switch, Model SW10-001145AN3NF. This product covers the frequency range from 70 MHz to 14.5 GHz with a minimum of 80 dB isolation and VSWR of 2:1 maximum. The 10 BIT input control word is TTL compatible and commands switching time from 50 to 90 percent settling with 2 uS. The power handling capability is 20 dBm.Available options include extended band and sub-band versions covering the entire 70 MHz to 18 GHz range.

The third new product is a new line of linear SSPA drivers.Three models cover all of the common satellite communication bands, AMFLD-05700850-60-16P for C-/X-Band, AMFLD-12501850-60-18P for Ku-/DBS-Band, and AMFLD-27003100-60-12P for Ka-Band. All three models have a common outline of 3.7x 2.5 x0.73-inches, SMA connectors for RF I/O and a multi-pin connector for supply, controls and detector output. The three models have a typical gain of 25 dB flat to within 1 dB, P1dB of 16 dBm, and output IP3 of 26 dBm. Power monitor DC output and gain are well compensated, allowing for a compliant temperature range of –25 to +80°C. Also incorporated is 30 dB of linear gain control. Drivers have a noise figure of less than 6 dB, operate from a single 15V supply and draw 400 mA typical—Hauppauge, New York