CU-Boulder — Cubesat Launches By NASA Set For November

A tiny communications satellite designed and built by University of Colorado at Boulder undergraduates has been selected as one of three university research satellites to be launched into orbit in November as part of a NASA space education initiative. The three Cubesats were built by CU-Boulder, Montana State University and Kentucky Space, which is a consortium of state universities.

CubeSats are roughly four inches on a side, have a volume of about one quart and weigh about 2.2 pounds. The satellites are being flown as part of NASA‘s Educational Launch of Nanosatellite, or ELaNA, mission, said Chris Koehler, director of the Colorado Space Grant Consortium, or COSGC, which is headquartered at CU-Boulder. The CU-Boulder satellite, named Hermes, was designed, built, and tested by roughly 100 COSGC students on the CU-Boulder campus — nearly all undergraduates — over a period of about two and one-half years, said Koehler. The goal of the mission is to improve communications systems in tiny satellites through on-orbit testing of a high data-rate communication system that will allow scientists and engineers to downlink large quantities of information.

Montana State designated its satellite as Explorer 1 Prime, or E1P. The name honors the launch and scientific discoveries of the Explorer-1 mission, which detected the Van Allen radiation belts more than 50 years ago. E1P will carry a miniature Geiger tube to measure the intensity and variability of the electrons in the Van Allen belts. The Kentucky vehicle is called KySat-1. It includes a camera to support a scientific outreach program intended for, but not limited to, Kentucky students in kindergarten through 12th grade. The satellite also has a 2.4-gigahertz industrial, scientific and medical band radio, which will be used to test high-bandwidth communications in the license-free portion of the S-band.

The three student satellites will be attached to a Taurus XL launch vehicle that will also launch NASA’s Glory mission to study solar radiation. CU-Boulder’s Laboratory for Atmospheric and Space Physics designed and built a multimillion dollar solar payload for the Glory mission known as the Total Irradiance Monitor that will measure the total light coming from the sun at all wavelengths to help determine the energy balance of the planet. CU-Boulder senior Nicole Doyle, project manager for Hermes and an aerospace engineering sciences department major, said the satellite has two communications systems. “One will allow us to ‘talk’ to the satellite and the other one will be used to test the high-speed communications system. If we are successful, the hopes are it can be used on other satellites.”

The three CubeSat satellites will be attached to the Taurus XL rocket in a mechanical system known as a PPOD developed by the California Polytechnic State University in partnership with Stanford University. Once the rocket reaches about 385 miles high, the satellites will be ejected from the PPOD and will spring off into separate orbits. The CU-Boulder satellite will be in contact with a COSGC ground station atop the Discovery Learning Center at the CU-Boulder engineering college. A second ground station is being built by the COSGC students in Longmont, about 15 miles northeast of Boulder, to monitor the high-speed communications data system, said Doyle. Of the 52 space grant consortiums in the United States, Colorado’s has been active in designing, building and flying 10 sounding rocket payloads, three space shuttle payloads, a satellite and hundreds of balloon experiments in the past 20 years, Koehler said.