The initial phases of this new project are going to make available an additional 18 MHz of satellite bandwidth on Eutelsat 10A, which is located at 10 degrees East—by mid-2017, that bandwidth will be upgraded to 36 MHz and will be made available to all end-users.
This enhancement project is being tasked to Newtec after that company's team up with Telekom Austria Group following EUMETSAT's upgrade order for the firm's EUMETCast that delivers near, real-time satellite data and products. As with the current uplink, the additional transponder will be established at Telekom Austria Group’s teleport in Aflenz, with a back-up uplink available at their teleport in the so-called “Vienna Arsenal” area in case of weather influence. Due to the good performance of the current DVB-S2 service, the second transponder will also use the same technology and coding—Newtec MDM6000 Satellite Modems.
Artistic rendition of the EUTELSAT 10A satellite.
The benefits gained by EUMETSAT come as a result of the modem’s unique onboard technologies—Equalink® 3 and Clean Channel Technology® (CCT). Developed by Newtec, Equalink 3 is a revolutionary linear and non-linear pre-distortion technology designed to compensate for the effects of imperfections in the filters and amplifiers of the satellite, providing breakthrough performance gains. Meanwhile, Newtec’s CCT, with 5 percent roll offs, provides further significant satellite efficiency improvements compared to the current DVB-S2 roll-off.
Newtec modems have been ordered for both of Telekom Austria Group’s uplink locations and will be placed in a one-for-one redundant set-up. The advanced uplink and downlink data integrity monitoring implemented for the current service will also be upgraded. With this advanced monitoring—which is based on Newtec NOP1900 Multicast Software (formerly known as TelliCast) and developed and implemented by EUMETSAT—the possibility exists to follow all data packets from the EUMETSAT office in Darmstadt, Germany, to EUMETCast receiving stations across Europe. This makes it possible to identify any packet losses in the complete transmission chain and where the loss occurred, making troubleshooting and future fault prevention much easier and quicker. Today there are more than 4,000 EUMETCast subscribers.
