SatNews

Satellite Industry Intelligence Since 1983

AAC Clyde Space’s components onboard ESA’s Jupiter mission, JUICE

AAC Clyde Space has been part of the team developing the SWI instrument onboard the European Space Agency’s (ESA) Jupiter mission JUICE, that began traveling to its destination after launching from French Guinea onboard an Ariane 5 rocket.  

AAC Clyde Space’s subsidiary AAC Omnisys has had a key role in the development of the Sub-millimeter Wave Instrument (SWI), one of 10 instruments onboard the spacecraft. Apart from Omnisys, Chalmers and AB Low Noise Factory from Sweden, have also been involved in developing the instrument, in a project headed by the Max Planck Institute in Germany and parties from a total of 10 countries.

The SWI is a spectrometer that will investigate the temperature difference, composition and dynamics of Jupiter’s atmosphere, exosphere and the surfaces of the icy moons. AAC Omnisys has been involved in the project since the start in 2009 assisting with system design and definition of various subsystems. Specifically, AAC Omnisys has contributed with a 600 GHz receiver based on integrated Schottky diode technology developed at the Department of Microtechnology and Nanoscience at the Chalmers University of Technology, and integrated cryogenic amplifiers from Low Noise Factory AB, in Gothenburg, Sweden. Two broadband spectrometers based on Omnisys proprietary full custom ASIC technology were also delivered. The circuits provide a performance that is 10 times better than previous technologies’ and enable more scientific research results.

AAC Clyde’s AAC Omnisys is one of the instruments that will be part of the European Space Agency’s (ESA) Jupiter mission, JUICE. The AAC Omnisys front-end receiver unit will measure spectra and continuum emissions, assisting in the mission’s overall goal, to find out if there are conditions for life in under the surface of Jupiter’s moons. The Jupiter mission, the ESA JUICE – JUpiter ICy moons Explorer – will for three years make detailed observations of the giant gaseous planet Jupiter and three of its largest moons Callisto, Europa and Ganymede. The mission will travel for seven years after its planned launch in 2023 to reach the planet. ESA JUICE is the first large-class mission in ESA’s Cosmic Vision 2015-2025 program.

“Today, we are celebrating that we are part of this prestigious project, ESA’s largest space mission to date. It is breath-taking to realize that our components are set to reach as far out into the universe as to Jupiter. Naturally, we are proud that AAC Omnisys was selected for this mission based on their profound expertise and unrivalled track record,” says AAC Clyde Space CEO Luis Gomes. 

JUICE is expected to reach Jupiter in July 2031. The vessel will enter orbit around Jupiter and make 35 flybys of the moons Europa, Ganymede and Callisto. Thereafter, ESA will use Jupiter’s immense gravity to steer the spacecraft into orbit around the largest moon in the solar system, Ganymede. Finally, the spacecraft will enter an orbit around Ganymede, where it will also crash.

For at least three years, JUICE will conduct detailed studies of the largest icy moons in the Jupiter system. The scientists hope that the mission will provide answers to how a solar system can arise and whether there are conditions for life under the frozen oceans on Jupiter’s moons.